Just thought I would throw this gear up here as well just for fun :-)
It is too cool to just sit there gathering dust !
Wednesday, 4 May 2011
Ver. 1.2 - Forearm Rocket Platform
This shows the mechanism from the servo side so you can see the action better, and a better view of the polarity changing switch. Think of the rocker switch you use for your power windows in your car. Same deal here. This can also be done by a non-lobotomized servo and a servo controller to give you the exact travel you want from the servo AND it is triggered by a simple tap switch. Touch it once, it goes up, again and it goes back down to rest. I will be doing it this way more than likely, its just that I had these old micros kicking around for the proof of concept.
Ver 1.2 - Forearm Rocket Bay
Ok, video #1 (RocketSystem.mov) shows the prototype for the rocket platform
This was made with scrap parts from my man-cave, and an old servo that I lobotomized, and finally a DPDT switch that is wired to switch polarity. Will provide all schematics for wiring the switch setup, templates for the linkage and how to place the servo.
This was made with scrap parts from my man-cave, and an old servo that I lobotomized, and finally a DPDT switch that is wired to switch polarity. Will provide all schematics for wiring the switch setup, templates for the linkage and how to place the servo.
Subscribe to:
Posts (Atom)